_edited.png)
PERFECT COVER® BREATHABLE
Perfect Cover® Breathable is a high-quality protective fleece for temporary floor protection. Perfect Cover® Breathable has a liquid-tight top layer and a self-adhesive underside, suitable for hard and smooth floors such as laminate, PVC, tiles, plastic floors, stairs, and newly laid floors. Due to the self-adhesive layer, the use of tape is no longer necessary. Ideal for use during painting, plastering, moving, and construction.
Features:
-
Highly Breathable
-
Self-Adhesive
-
Liquid Proof
-
Anti Slip Coating
-
Smooth Application
-
Clean Removal
Its easy-to-apply design ensures a smooth installation process, while its resistance to tears and punctures delivers long-lasting protection. Perfect Cover® Breathable is your go-to solution for maintaining clean and damage-free surfaces during construction, renovation, or everyday use.
Available in:
Item: 28250AM | 538 ft² | ± 39" x 164' | ± 18 LBS
Item: 28225AM | 269 ft² | ± 39" x 82' | ± 9 LBS
DESCRIPTION
Perfect Cover® Breathable is specially designed for newly laid and treated floors, as well as moisture-sensitive surfaces like natural stone and cast floors. Ensure the substrate is dust-free, smooth, clean, and chemical-free before application. With a processing temperature range of 5 to 40 degrees Celsius, each run should overlap by approximately 10 cm. Pre-testing is recommended.
Perfect Cover® Breathable offers superior quality with features such as anti-slip, liquid-proof, shock-absorbing, breathable, and self-adhesive properties, eliminating the need for additional tape. Made from recycled polyester fleece with an extra PE top layer, it incorporates a special membrane that allows moisture to escape while preventing liquid ingress, with a breathability rate of 1.2 liters per m² per 24 hours.
Note: Perfect Cover® Breathable is not suitable for freshly laid concrete and can be used for up to 3 months. Ensure underfloor heating is switched off during use.
SPECIFICATIONS
-
Color: White/Blue
-
Material: Non-woven fabric made of 100% PES fibers
-
Adhesive: Water-based acrylic for secure adhesion
-
Laminated: Laminated with an impermeable, breathable nonwoven
-
Weight: 160 grams per square meter
-
Applications: Covering natural stone, cement-bonded poured floors, parquet, newly laid floors, poured floors
Application: The substrate must remain dry, clean, dust-free, and free from chemical agents. It is advisable to conduct preliminary tests. Lay the rolls with an overlap of approximately 10 cm and press firmly. Processing temperature should be between 5 degrees Celsius and 40 degrees Celsius. Not suitable for recently laid concrete. The underfloor heating must be switched off.
.png)